pro.point 30A PRO CUT 30, Руководство пользователя, Страница: 21 / 68

V1.0 30A PRO CUT 30 PLASMA CUTTER 8784639
Visit www.princessauto.com for more information 21
1. Choose a compressor with a CFM output that matches the
work task. Cutting a thick plate may be slower, requiring a
longer duration of air from the compressor. Chose a
compressor with 1.5 to 2 times the CFM capacity that you
will require for the task.
2. Follow operating and set up instructions in the compressor’s
manual before connecting to the plasma cutter.
3. Connect the air hose to the air connection (N) on the back of
the plasma cutter. Use thread sealant to prevent air leaks.
4. Install an air dryer on the compressor air hose to prevent
moisture from reaching the plasma cutter. Remember to
compensate for the slight loss of air pressure the air dryer
will cause.
OPERATION
PREPARATION
WARNING! The plasma cutting unit is ‘live’ once turned on
and can cause serious electrical and burn injuries if
mishandled. Take all precautions listed in this manual when
handling the plasma cutting unit.
1. Check that all cables and hoses are connected in the correct
manner.
1.1 Use the 115/230V power adapter if using the higher
voltage function.
2. Check that the plasma cutter unit is working. Turn the power
on (J). The fan (L) should start up and the power LED (B)
will light up. The overload LED (C) should remain dark. If it
lights up, identify and correct the problem, before using the
plasma cutter.
3. Set the air pressure to allow air flow through the torch (see
Specifications). Confirm the air flow is constant and does
not sputter.