3
For technical questions call: 1-800-665-8685
8380206
V 2.0
1" Impact Wrench
with 6" anvil
SPECIFICATIONS
Max torque
2,000 ft-lb
Working torque
1,500 ft-lb
Average air consumption
9.1 CFM @ 100 PSI
No load speed
5,000 RPM
Max. air pressure
150 PSI
Air inlet
1/2" NPT
Air hose
1/2" I.D.
Drive size
1" square drive with 6" extended anvil
* The actual torque delivered at each setting will depend on the air pressure supplied to the tool. Test the actual torque by
tightening a nut or bolt at each setting, then observing the resultant torque with a mechanical torque wrench (not included).
INTRODUCTION
Through precision machining and high quality componentry, this 1" square drive impact wrench has the power to
deliver up to 2,000 ft-lb of torque. Twin hammer construction and a lightweight composite body provide reliable
continuous torque with less vibration and fatigue for users. The extended 6" anvil allows you to work in tight areas.
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. Keep this manual for the safety warnings
and precautions, operating, inspection and maintenance instructions. When using this tool, basic precautions
should always be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when
this manual refers to a part number, it refers to the parts list included. Before allowing someone else to use this tool,
make sure they are aware of all safety information.
WORK AREA
1. Keep your work area clean and well lit. Cluttered and dark areas invite accidents.
2. Operate in a safe work environment. Do not use air tools in damp or wet locations. Do not expose to rain.
Do not use power tools in the presence of flammable gases or liquids.
3. Keep children, bystanders and visitors away from the work area. Do not let them handle tools or extension
cords. No one should be in the work area if they are not wearing suitable protective equipment.
4. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always lock up
tools and keep them out of reach of children.
