background image

LIMITED ONE YEAR WARRANTY 

    

PRO-LITE INC. Warranty to the original consumer that each of its PRO-LITE products and all components therein contained will be free from defects in materials and/or workmanship for one year 
from the date of purchase or unless otherwise specified. Any warranty hereunder is extended only to the original consumer purchaser and is not assignable. 

Warranty Conditions 

In  the  event  of  malfunction  or  other  indication  of  failure  attributable  directly  to  faulty  workmanship  and/  or  material,  PRO-LITE  INC.  will  at  its  option,  repair  or  replace  said  products  or 
components to whatever extent it shall deem necessary to restore said product to proper operating condition, provided the consumer purchase has previously returned the enclosed Warranty 
Registration Card to PRO-LITE INC, and/or can provide an original dated receipt of purchase. During the first year after the date of purchase, all in house labor and materials will be provided 
without  charge.  There  shall  be  no  warranty  for  either  parts  or  labor  after  the  expiration  of  one  year  from  the  date  of  purchase.  PRO-LITE  INC.  does  not  warranty  bulbs  in  combivision  of 
fluorescent board products. 
 
Units must be returned postage prepaid. It is recommended that the unit be insured when shipped. Units returned for which a Warranty Registration Card has not been submitted or out-of-
warranty units returned will be repaired or replaced (at the option of PRO-LITE INC.) and the customer will be charged for parts and labor. 
 
The customer shall be solely responsible for failure of any PRO-LITE INC. product or component thereof, resulting from accident, abuser misapplication of the product, and PRO-LITE INC. assume 
no liability as a consequence of such events under the terms of the Warranty. 
 
Incidental and consequential damages caused by malfunctions, defect, or otherwise and with respect to breach of any express or implied warranty, are not the responsibility of PRO-LITE INC. 
and to the extent permitted by law are hereby excluded both for property and, to the extent, of unconscionable, for personal injury damage. (Some states do not allow the exclusion or limitations 
of incidental or consequential damages, so the above may not apply to you.) 
 
Reseller Warranty 
Resellers, which fall under the category of sign company, installer, contractor, or electrician, excludes coverage of all labor, travel, and maintenance fees associated with the servicing of 
defective signs.  Standard warranty coverage is based on the product for Resellers of Digibrite products. Warranty for sign resellers covers all parts and factory labor (not on-site labor). 
  
State Law Exceptions 
This Warranty gives you specific legal rights and you also have other rights that vary from state to state. 
 
This Warranty is in lieu of all other express warranties which now or hereafter might otherwise arise with respect to this product. ANY AND ALL IMPLIED WARRANTY OF MERCHANTIBILITY AND 
FITNESS FOR PARTICULAR USE SHALL HAVE NO GREATER DURATION THAN THE PERIOD THE EXPRESS WRITTEN WARRRANTY APPLICABLE TO THIS PRODUCT AS SHOWN ABOVE ND SHALL 
TERMINATE AUTOMATICALLY AT THE EXPIRATION OF SUCH PERIOD. No action shall be brought for breach of any implied or express warranty after one year subsequent to the expiration of the 
period of the express written warranty. (Some states do not allow limitations of how long an implied warranty lasts, so this limitation may not apply to you.) 
 
Returned Goods Authorizations (RMA) 
Before returning a product for repair, the customer must call PRO-LITE INC. Customer Service at (714) 668-9988 for a Return Materials Authorization Number. This number should be included 
with the customer’s mailing address and telephone number when the product is returned. Products should be returned to: PRO-LITE INC., Attention Warranty/Repair, 3505 Cadillac Ave. Bldg D, 
Costa Mesa, CA  92626 (postage prepaid). After receiving the RMA, the user shall promptly return the product at the user’s expense to Pro-Lite Co., Inc. after receiving instructions as to when 
and where to ship product. Failure to follow this procedure shall void this warranty. Should the number of pieces received by Pro-Lite differ from the RMA /-, the customer will be notified 
and adjustments will be made at that time. Pro-Lite Co. Inc. reserves the right to examine all failed products and reserves the right to be the sole judge as to whether any products are defective 
and covered under this warranty 
 
Freight Cost 
Products will be returned to customer after repair or replacement at Pro-Lite’s expense if the product is purchased within 30 days and Products will be returned to customer at customer’s 
expense after 30 days from the date of purchase. In the event Pro-Lite would pay for the freight, it is Pro-Lite’s option to choose the carrier and method to any destination within the United 
States of America. Should the customer desire some other specific form of conveyance, or be located outside the border of the U.S. then the customer must bear the cost of return shipment. 
    
The warranty is subject to change unless otherwise agreed to this warranty condition. 

     

    

3505 Cadillac Ave., Bldg. D, Costa Mesa, CA 92626, Phone: (714) 668-9988     Fax: (714)668-9980     Email: [email protected]     Web: www.pro-lite.com    

                                                      REV. 210318 

Содержание Digi-Brite CLG-100-12





































Отзывы: