INSTALLATION AND OPERATING INSTRUCTIONS
7
SV-C1 CONTROL PANEL DESCRIPTION
Ref Description
1. Power
In standby mode press to turn unit on. The current temperature will
displayed.
Second press will turn unit off to standby mode. Fan will automatically
stop after approximately 30 minutes.
2.
Set Temperature/Time
Switches between Temperature and Time settings.
First press, Temperature display will flash, set desired temperature
with Increase/Decrease buttons.
Second press, Time display will flash, set desired cooking time
with Increase/Decrease buttons.
If no settings are selected the display will flash 10 times, then exit Set
Temperature/Time mode.
3. Start/Stop
Press Start/Stop to start the machine, heating and Circulation will start.
Press Start/Stop again to return the machine to standby mode.
4. Increase
‘+’ increases the Temperature and Time settings.
Ref Description
5. Decrease
‘-’ decreases Temperature and Time settings.
6.
Set Temperature Unit
Press to switch between Celsius and Fahrenheit temperature units.
7.
Temperature Display
Displays the actual temperature of the water bath at that moment.
8.
Set Temperature Display
Displays the set operating temperature.
9.
Time Display
Prior to the Start/Stop button being pressed, the set time is displayed.
In working mode the time remaining from the set time is displayed.
10. Heat Indicator
Icon Flashes when Heating.
11. Cleaning Reminder
Icon will illuminate after 20 individual cycles or 100 hours total
operating time.
12. Circulation Pump
Icon Flashes when circulating water.
