25
Blower
Blower Switch
Blower Exhaust Vent
Lighting Systems
Baitwell Light
The baitwell light switch is located on the switch panel and is labeled baitwell with a light symbol below. To
turn on the baitwell light, press the switch forward and open the baitwell lid to see if the baitwell light is on.
Press the baitwell light switch to the down or aft position to turn off the baitwell light.
Bilge Lights
The bilge light switch is located on the switch panel and is labeled bilge with a light symbol on the switch.
The 2 bilge lights are installed on the port and starboard stringers. Press the switch forward to turn on the
bilge lights. Press the bilge light switch to the down or aft position to turn off the bilge lights.
Cabin Lights
Cabin lights are installed in the main cabin, the mid berth and the head area. The cabin light switch is
located on the AC/DC panel inside the cabin, on the port wall of the main salon. See the section under
Electrical System earlier in this chapter for more information on the AC/DC panel.
Switch the DC main and the cabin light switches to the on position to turn on the cabin lights. Each of these
lights can then be turned on or off individually. When you are finished using the lights, press the cabin light
and DC main switches to the off position.
Bullet lights (3) are located in the main cabin. Each light can be turned on individually by
turning the small switch located on the base of the light.
A florescent light is located in the head area and can be turned on by pressing the small
switch located at the end of the light assembly.
A dome light is located in the mid berth and can be turned on by flipping the small toggle
switch on the base of the light assembly.
Courtesy Light - Cabin
A small courtesy light is installed at the top of the cabin steps. This light
can be turned on at the console by pressing the courtesy light switch in the
forward position. The switches on the AC/DC panel do not control this light.
Cockpit Lights
The cockpit lights are small circular lights located around the forward and
aft cockpit area. Locate the 2-way cockpit light switch on the switch panel
and press the switch in the forward position to turn on the cockpit lights.
Press the cockpit light switch in the aft position to turn the lights off.
Navigation and Anchor/All Around Lights
The navigation and anchor/all around lights are required to be used for operation at night or under low
visibility conditions to indicate your position to other boaters. Visually check the operation of your navigation
