background image

 

3

Owner’s Package 

 
Each Pro-Line boat comes with an Owner’s Package that contains this Owner’s Manual along with materials supplied by 
various manufacturers whose products have been installed on your boat.  Manufacturers of certain products (i.e., Stereo, 
TV, Stove, Refrigerator, Microwave, Engines, Electronics, etc.) provide their own limited warranty and owner’s manuals.  
While we have endeavored to be as accurate as possible in this manual, if you should notice a discrepancy between the 
information in this manual and that of the individual supplier’s manual, 

always follow the instructions in the supplier’s 

manual

 

Make sure that you complete the individual warranty cards for these products and forward them on to the respective 
manufacturers to register for your warranty with them.  Retain all materials in your Pro-Line Owner’s Package for easy 
reference. 
 

Dealer Responsibilities 

 

Your dealer's responsibilities include but are not limited to: 

 

 

Pre-delivery verification of proper rigging and operation.  Deliver the boat in water ready condition unless 
you and your dealer have agreed upon other arrangements. 

 

Complete the pre-delivery checklist with the customer at the time of delivery. 

  Provide adequate orientation in the general operation of your Pro-Line including an explanation of the 

specific safety considerations regarding the use of the systems and components. 

 

Provide an explanation of the owner’s package and literature, including the warranty registration cards for 
the vessel, engines and all of the separately warranted equipment and accessories. 

 

Discuss the terms of all warranties and emphasize the importance of registering each warranty with the 
specific manufacturers. 

  Repair any damages that may have occurred to the boat while the boat has been in the dealer’s 

possession. 

 

Provide service to Pro-Line boat owners within the locality of the dealership. 

 

Explain local and out of area service procedures during and after the warranty periods. 

 

Customer Responsibilities 

 

  Review and sign the Pre-Delivery Inspection (PDI) report for the boat and motors with your dealer to 

ensure that your boat is in top condition when you take delivery. 

 

Examine the boat at time of delivery to insure that all systems and components are functioning safely and 
properly.  Report any outstanding issues (i.e., scratches, missing items, etc.) to your dealer before or 
during the delivery of the boat. 

 

Read all literature and instructions to ensure proper usage and operation of the equipment as well as how 
to use and maintain all equipment as directed. 

 

Read and understand the limited warranty.   Sign the warranty registration card and mail it to Pro-Line 
Boats. 

 

Contact your local Pro-Line dealer for assistance with any warrantable repairs. 

 

Transportation of your boat to and from your dealer or repair facility for warrantable repairs. 

 

Schedule your 20-hour boat and engine check up with your dealer. 

 

Know your boat and the rules of the road before you use your boat. 

 

Be proficient in boat handling and safety.  This manual is not intended to provide complete 
training on all aspects of general boat operations.  We at Pro-Line urge all boat owners and 
operators to attend a boating safety course before operating a boat. 

 

 

Содержание 2012 21 CC








































Отзывы: