1 2 3 4 5 6 7 8 9 10 11 12 13
1 Horn - The horn is used to signal, warn, or alert other boats, swimmers or people on shore.
switch to deactivate the horn. Using different sequences of horn blasts indicates different and
of the horn.
2
Depress the horn switch to the up or forward position to activate the horn. Release the horn
sometimes dangerous situations to you or someone around you.
Avoid any horn use without an appropriate purpose. See the Safety Section in this manual and/or
take a safe boating course for more information on the proper use
Bilge Pump (Aft) - Your 25 Walk is equipped with an aft bilge pump. This 1100 gph pump is
located in the aft bilge and the automatic float switch is mounted in close proximity to the pump.
The aft bilge pump is wired automatic to the battery and has a manual override located at the
switch panel on the console. The automatic float switch is wired directly to the
Starboard
battery
rminal through a breaker or inline fuse. The circuit breaker for the aft bilge pump is located at
at provides power to the bilge pump charged. If the battery is
ot charged and flooding occurs, the boat could swamp causing damage and possible loss of life
the indicator light on your bilge pump switch comes on, check your bilge for water. It
not uncommon for rain water or water from washing your boat to accumulate in the bilge.
3
te
the helm next to the manual switch.
Keep the bilge area clean and free from debris that could clog ports or inhibit float movement.
Also, keep the battery (starboard) th
n
or property.
Depressing the aft bilge pump switch to the up or forward position activates the bilge pump. If for
some reason
is
Standing water will activate the automatic float that is connected to the bilge pump. If you notice
your pump running frequently during your day on the water, you should check the thru hull fittings,
hose connections, etc. for any possible leaks.
Navigation & Anchor/All Around Lights - Locate the Nav. Light switch on the instrument panel.
This 3-way switch (forward, middle, back/aft) functions as follows when you press the switch:
o
If the gauges were provided by the engine manufacturer (i.e.,
on.
•
Mid
p
•
Back/Aft position – Anchor/all around light is on; bow and gauge lights are off.
•
Forward position - Turns on the bow lights and the anchor light. This position will
also activate the red light in your compass.
o
If you have Faria gauges on the dash panel, this function will
illuminate the gauge lights.
Mercury, Honda, etc.), your gauge lights will be illuminated when
the ignition switch is turned
dle osition – All lights are off.
17
