Pro-Line Boats 2004 30 Walk, Руководство пользователя, Страница: 29 / 38

* Decreasing pitch will enhance acceleration and power at high loads.
* Increasing pitch will increase speed at light loads.
* Decreasing diameter will compensate for loss of power at high altitudes.
* Increasing diameter results in higher efficiency at low speeds at the
expense of top end speed and acceleration.
Be sure not to over rev the engine when re-propping or engine damage could result.
Operating your engine with a damaged prop will decrease performance, increase fuel
consumption, and may introduce undesirable handling characteristics. The vibration
caused by running a damaged prop could cause costly damage to your lower drive unit.
Service and Care
To enjoy trouble free use of your Pro-Line follow the recommended procedures and
instructions relating to the service and care of your boat. Failure to follow the following
maintenance practices will result in shorter life of your equipment and may void your
warranty.
Much of the installed equipment on your Pro-Line is separately warranted. Follow the
care instructions found in your owner’s packet to keep these warranties in force.
Your engine manual contains service information relating to your particular engine
installation. Follow the provided recommendations for trouble free service, and to
preserve your warranty.
Fiberglass / Gel Coat
The gel-coated fiberglass on your Pro-Line provides a smooth, easy to clean, and
maintain surface. Regular cleaning and waxing will preserve the finish on your boat for
many years to come.
Use a mild detergent and plenty of fresh clean water to swab down the exposed gel coat
of your boat. Do not use harsh cleaners containing ammonia, chlorine, or abrasives. Do
not use acetone or any ketone solvents. Stubborn stains may be removed with alcohol or
kerosene provided they are washed off immediately and completely with a mild detergent
and water.