© Pro-‐Ject Audio Systems ·∙ Pro-‐Ject Debut Carbon RecordMaster HiRes ·∙ Revision 2017.03.30
6
Please note: Connection should be made to an USB-‐socket of your computer directly. Connecting to
USB-‐hubs or switches can cause problems.
Recording program is delivered on supplied CD-‐ROM together with USB driver Vinylstudio Lite (software from
British specialist AlpineSoft)
Sampling rate of USB output is set from computer
Setting the record level
The
Record Level
knob on the rear panel is used to set the level of the analogue signal going to the A/D
converter. A red clipping LED indicates when the level is too high and the signal is distorted.
Make sure that level is set to keep the LED off all the time.
Vinylstudio settings
RecordMaster firmware v1.01
-‐ RecordMaster allows following record settings:
1.
Pulse-‐code modulation (PCM):
−
16/24/32-‐bits at 44.1k / 48k / 88.2k / 96k / 192kHz / 384kHz
2
. Direct Stream Digital (DSD) over PCM (DoP):
−
DSD standard rate: DSD64 at sample rate 176.4kHz
−
DSD double rate: DSD128 at sample rate 352.8kHz
−
DSD quad rate: DSD256 at sample rate 705.6kHz
-‐ VinylStudio Lite record setting:
Check Level:
−
Input Device:
ASIO
−
ASIO Driver:
Project Box ASIO Driver
−
DSD Input:
PCM or DSD (depends on Recording
Options)