© Pro-‐Ject Audio Systems ·∙ Pro-‐Ject Debut Carbon RecordMaster HiRes ·∙ Revision 2017.03.30
12
Mains power connection
The turntable is supplied with the universal power supply with 3 exchangeable sockets adapters suitable for all
countries. Select the correct adapter for your country and insert the adapter to the exchangeable part of the
power supply.
Connect the low voltage plug from the power supply to the socket (13) on the rear of the record player before
connecting the power supply to the mains.
Fitting the lid
Fit the lid (dust cover 10) carefully over the hinge prongs and adjust the screws (12) until the lid stays open
where you want it to without being too stiff to open or close.
Switching on and off, changing replay speed
To play records at 33 r.p.m. press the ON/OFF switch (19) to starts the motor. Pressing the ON/OFF switch two
times selects 45 r.p.m.. The selected speed is shown respectively by the flashing LED. When the platter has
attained full speed the LEDs stop flashing.
To be able to play 78 r.p.m. the flat drive belt has to be removed and the round drive belt has to be fitted
around the sub-‐platter (4) and the larger diameter part of the motor pulley (2). To do so the platter (5) has to
be removed.
After the round drive belt has been fitted, pressing the ON/OFF switch two times selects 78 r.p.m.. When full
speed is attained the LED
45
stops flashing.
A long (more than three seconds) press on the ON/OFF switch stops the motor.