Pro-Ject Audio Systems Box Design Pre Box DS, Инструкция по применению

Страница: 2 / 4

© Audio Trade GmbH · Pro-Ject Pre Box DS · Revision 2013.1.15
2
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO preamplifier.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Connectors
18V
!
Make all connections whilst the preamplifier is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the
left channel black or white.
Never use any other power supply than the one supplied with the unit.
Pre Out
A power amplifier or active loudspeakers can be connected to the output sockets marked Pre Out.
Subwoofer output
An active subwoofer can be connected to the output sockets marked Sub.
Record output, connecting a headphone amplifier
Out connects an analogue record device ore a Pro-Ject Head Box headphone amplifier.
Out provides a fixed output level.
Inputs
Line level sources such as CD player radio or TV can be connected to the input sockets marked 1 - 4.
Remote power-on, switching voltage
The socket marked Trigger provides a 12V DC switched output voltage for remote power-on of units with this
facility (such as the Pro-Ject Amp Box DS or Pro-Ject Amp Box DS Mono), which corresponds to the position of
the stand-by switch (on/off) on the front panel.
A 45cm remote power-on cable (polarity
+
) is supplied with the Pro-Ject amplifiers for connecting the
remote-switched power socket to the Pro-Ject Pre Box DS. Longer cables are available from your Pro-Ject dealer.
Do not use this trigger output for any other connections for which it is not designed.
Mains power connection
Connect the low voltage plug from the power supply to the Power 18V " socket before connecting the power
supply to the mains.