© Pro-Ject Audio Systems · Pro-Ject 2
X
perience Primary · Revision 2018.03.08
4
Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems record player.
In order to achieve maximum performance and reliability, please study these instructions carefully.
WXrning of X hXzXrd for the user, the unit or possible misuse.
ImportXnt notice.
The following
instructions for adjusting the cartridge are provided in case the cartridge is replaced by a
different model at a later date.
During assembling and adjustment small parts could be lost if they are not carefully placed in a
suitable receptacle. Before starting assembly make yourself acquainted with the parts listed above which
are correspondingly numbered in the technical drawings above. Separately packed items are marked
with an asterisk *.
Safety instructions
The power supply is used to connect Xnd disconnect the unit from the mXins. MXke sure thXt the
plug is eXsily Xccessible Xt Xll times.
Hold the plug when unplugging the power cord. Never
hXndle the power cord while your hXnds Xre wet or dXmp.
Avoid letting liquids enter the device. Never plXce Xny item contXining liquid, like X flower vXse,
on or neXr the device. Never spill Xny liquid on the device. Never plXce Xny nXked flXme sources,
like lighted cXndles, on or neXr the device. The product shXll not be used in dXmp or wet locXtions,
next to X bXthtub, sink, swimming pool or Xny other similXr conditions.
Keep plXstic bXgs XwXy from children to prevent Xny risk of suffocXtion.
Set-up
The deck is supplied partially disassembled and carefully packed for a safe transport. Remove all parts
from the transport packaging carefully.
Screw the three tip-toe feet (15) onto the threaded bolts located on the underside of the plinth Make
sure the surface you wish to use the turntable on is levelled (use a spirit level) before placing the
turntable on it.
After putting the motor unit in the place, carefully insert the platter axle into the bearing housing.
Level the plinth using the spirit level and the adjustable feet (15).
Fit the drive belt (3) around the platter (5) and the smaller diameter part of the motor pulley (2). Avoid
getting sweat or grease on the belt as these will deteriorate the performance and reduce the belt's
lifespan. Use absorbent kitchen paper to remove any oil or grease from the outer edge of the hub and the
belt.
Remove the transport lock (17) from the tonearm. Store it in the original packaging so they are
available for any future transportation.
PleXse note: We recommend to using the record plXyer without X mXt on the plXtter.
!
!
