PRO Intellect Technology 40 NEO, Руководство пользователя

Страница: 7 / 12

7
8 Function settings and troubleshooting
8.1. Changing the UV detection sensitivity level (PRO 40U).
Press and hold “ UV ” button for 4 seconds. The display 2 will show Uu[X] sign, where X
– is level of UV detector sensitivity:
1 – minimum sensitivity
2 – average sensitivity (recommended)
3 – high sensitivity
After each pressing of UV button, sensitivity level changes to 1 value. Press “
START ”
button in order to enter new value and exit the mode for changing the sensitivity level.
8.2. Changing the optical density sensitivity (banknote transparency)
Press and hold “ ADD ” button for 4 seconds. Display 2 will indicate Ed [X] sign,
where X – is a number indicating optical density level:
1 – minimum
2 – average (recommended)
3 – high sensitivity level
After each pressing of
ADD button sensitivity level changes by 1 value.
Press “ START ” button to enter a new figure in the data store and exit sensitivity level
change mode.
Attention ! New settings are stored for future use.
Remember ! Wrong settings can cause failures and frequent error messages.