19
47. Route the Low Cable (75) through the hole in the
center of the Press Frame (8). Attach the Low Cable
to the indicated hole in the Leg Lever (41) with a 3/8Ó
x 2 3/4Ó Bolt (46), two 3/8Ó Flat Washers (48), and a
3/8Ó Nylon Jam Nut (63).
Go back to step to step 27 and follow the instruc-
tions to tighten the Cables.
47
75
8
46
48
63
41
48
48. Attach the Shroud (34) to the brackets underneath
the Weight Top Frame (66) with two 1/4Ó x 5/8Ó
Screws (97).
97
66
97
34
Bracket
48
49. Attach the Shroud (34) to the brackets on the Weight
Base (5) with two 1/4Ó x 5/8Ó Screws (97).
97
34
97
5
49