7
2. The massage chair
features three
separate massage
zones: the upper
back, lower back,
and thigh zones.
The massage zones
are controlled with
the Upper Back,
Lower Back, and
Thigh buttons. Pressing a button once will activate
a massage zone. Pressing the button again will
turn off the massage zone. Press the buttons to
activate the desired massage zones.
3. After you have
activated the desired
massage zones,
press the Int
or Ð buttons to
adjust the intensity
of the vibrating
massage action.
Note: If no buttons on the hand control are
pressed for twenty minutes, the vibrating massage
action will automatically stop.
To restart the
massage action, follow steps 1 through 3 above.
HOW TO USE THE AUTOMATIC MODES (FULL
BODY WAVE, FULL BODY PULSE, AND UPPER
BODY WAVE)
1. Press the Mode
button repeatedly to
select the desired
mode. A mode indi-
cator will light to
show which mode is
selected.
When Full Body
Wave is selected,
the upper body,
lower body, and
thigh zones will be activated in sequence, produc-
ing a wave-like massage motion. When Full Body
Pulse is selected, the upper body, lower body, and
thigh zones will be activated together with a
pulsing motion. The Upper Body Wave is similar to
the Full Body Wave, but only the upper body and
lower body zones will be activated.
2. After you have
selected the desired
mode, press the
Speed and Intensity
buttons to adjust the
speed and intensity of
the vibrating
massage action.
Note: If no buttons on the hand control are
pressed for twenty minutes, the vibrating massage
action will automatically stop.
To restart the
massage action, follow steps 1 and 2 above.
HOW TO ACTIVATE THE BUILT-IN HEATER
Whether the Manual
mode or one of the auto-
matic modes is selected,
you can add soothing
heat to your massage, if
desired. To turn on the
heater, press the Heater
button. The Heater indicator will light. Press the button
again when you want to turn off the heater. Note:
When the heater is on, the maximum intensity setting
of the vibrating massage action will be lower. Therefore,
the intensity may decrease slightly when the heater is
turned on.
Note: If no buttons on the hand control are
pressed for twenty minutes, the heater will
automatically turn off.
To turn on the heater, follow
the instructions above.
HOW TO TURN OFF THE POWER
To turn off the power, slide the power switch to the
ÒoffÓ position. The power indicator will darken.
HAND CONTROL TROUBLE-SHOOTING
If the hand control does not function properly, make
sure that the transformer on the power cord is
plugged into a 120-volt outlet. In addition, make sure
that the hand control is properly connected to the
massage pad (see assembly step 2 on page 5).
