![background image](http://html1.mh-extra.com/html/pro-form/pfel04916-1/pfel04916-1_user-manual_1605926021.webp)
21
Identify the Left
Shield (44).
Remove the
three M4 x 16mm
Screws (61)
and the three
3/16" x 1 3/8"
Screws (64) from
the Left Shield.
Make sure to
note which size
Screws you
remove from
which holes. Then, carefully remove the Left Shield.
Next, loosen the Idler Screw (97). Tighten the Idler
Adjustment Screw (72) until the Drive Belt (46) is tight.
When the Drive Belt is tight, retighten the Idler Screw.
When you are finished, reattach the parts that you
removed. Then, plug in the power adapter.
46
72
97
61
64
64
44
61
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to
computer or peripheral devices. Changes or modifications not expressly approved by the party respon
-
sible for compliance could void the user’s authority to operate this equipment.
Содержание PFEL04916.1
Страница 4: ...4 all STANDARD SERVICE PLANS...