21
HOW TO CHANGE CONSOLE SETTINGS
1. Select the settings mode.
To select the settings mode, press the Settings
button. The first settings screen will appear in the
display.
Note: If you are using the manual mode or an iFit
workout, end your workout before you press the
Settings button.
2. Navigate the settings mode.
While the settings mode is selected, you can
navigate through several settings screens. Press
the Display button repeatedly to select the desired
settings screen.
3. Change settings as desired.
Software Version Number—The software version
number will appear in the display.
Unit of Measurement—The currently selected unit
of measurement will appear in the display. The con-
sole can show speed and distance in standard or
metric units of measurement. To change the unit of
measurement, press the Std/Metric button repeat-
edly. To view workout information in standard units,
select STD. To view workout information in metric
units, select MET.
Display Test—This screen is intended to be used
by service technicians to identify whether the
display is working correctly.
Button Test—This screen is intended to be used
by service technicians to identify whether a certain
button is working correctly.
Total Time—The word TIME will appear in the
display. The display will show the total number of
hours that the elliptical has been used.
Total Distance—The letters MI or KM will appear
in the display. The display will show the total
distance (in miles or kilometers) that the elliptical
has been pedaled.
Contrast Level—The currently selected contrast
level will appear in the display. Press the Silent
Magnetic Resistance increase and decrease but-
tons to adjust the contrast level.
Demo Mode—The currently selected demo mode
option will appear in the display. The console
features a demo mode, designed to be used if the
elliptical is displayed in a store. If the demo mode
is turned on, the console will not turn off and the
display will not be reset when you finish exercis-
ing. Press the Silent Magnetic Resistance increase
button repeatedly to select a demo mode option. To
turn on the demo mode, select DON. To turn off the
demo mode, select DOFF.
4. Exit the settings mode.
Press the Settings button to exit the settings mode.
