Pro-Form performnce 600iPFTL79515.0, Руководство пользователя

Страница: 16 / 36

16
16. Firmly tighten the four 3/8" x 2 1/4" Screws
(7), the two 3/8" x 1 3/4" Screws (62), and the
two 3/8" x 1 1/4" Screws (63).
Next, set the Left Inner Base Cover (106) onto
the lower end of the Left Upright (89). Slide the
Left Base Cover (82) downward and press it
onto the Left Inner Base Cover.
Then, set the Right Inner Base Cover (14) onto
the lower end of the Right Upright (90). Slide the
Right Base Cover (83) downward and press it
onto the the Right Inner Base Cover.
106
83
82
62
89
7
7
63
62
14
63
16
90
18. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the fl oor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28). Note: Extra parts may be
included.
17
105
Start First
17. Press the two tabs on the Tablet Holder (105)
into the slots (L) in the console assembly (J).
Attach the Tablet Holder (105) to the console
assembly (J) with four #8 x 5/8" Machine Screws
(26).
Note: Start the two top Machine Screws
fi rst, and then start the two bottom Machine
Screws. Be careful not to overtighten the
Machine Screws.
IMPORTANT: The Tablet Holder (105) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
J
L
26