manualshive.com logo in svg
background image

16

 

 As you exercise, keep your 
pedaling speed near the goal 
speed for the current seg-
ment. The goal speed will 
appear in the display when 
the speed display mode is 
selected. 

 

 IMPORTANT: The goal 
speed is intended only to 
provide motivation. Your 
actual pedaling speed may be slower than the 
goal speed. Make sure to pedal at a speed that 
is comfortable for you. 

 

 If the resistance level for the current segment is 
too high or too low, you can manually override 
the setting by pressing the Resistance buttons. 

IMPORTANT: When the current segment of the 
workout ends, the pedals will automatically 
adjust to the resistance level programmed for 
the next segment.

 

 If you stop pedaling for several seconds, a series of 
tones will sound and the workout will pause. 

 

 To resume the workout, simply resume pedaling. 
The workout will continue until the last segment 
of the profile flashes and the last segment of the 
workout ends. 

4.  Follow your progress with the display.

 

See step 4 on page 14.

5.  Measure your heart rate if desired.

 

See step 5 on page 15.

6.   When you are finished exercising, the console 

will turn off automatically.

 

See step 6 on page 15.

 HOW TO USE AN IFIT WORKOUT

iFit cards are available separately. To purchase iFit 
cards, go to www.iFit.com or call 1-888-533-1333. iFit 
cards are also available at select stores.

1.  Turn on the console.

 

 Press any button or begin pedaling to turn on the 
console. 

 

 When you turn on the console, the display will turn 
on. A tone will sound and the console will be ready 
for use.

2.  Insert an iFit card and select a workout.

 

 To use an iFit workout, insert an iFit card into the 
iFit slot; make sure that the iFit card is oriented so 
that the metal contacts are face down and are fac-
ing the slot. When the iFit card is properly inserted, 
the indicator next to the slot will turn on. 

 

 Next, select the desired workout on the iFit card by 
pressing the increase and decrease buttons next to 
the iFit slot.

 

 A profile of the resistance levels of the workout 
will scroll across the upper display, the duration of 
the workout will appear in the center display, and 
the number of the workout will appear in the lower 
display.

 

 A moment after you select a workout, the voice of a 
personal trainer will begin guiding you through your 
workout. iFit workouts function in the same way as 
preset workouts. To use the workout, see steps 3 to 
6 starting on page 15.

3.   When you are finished exercising, remove the 

iFit card. 

 

 Remove the iFit card when you are finished exer-
cising. Store the iFit card in a secure place.

iFit Slot

iFit Card

Содержание 831.21952.9

























Отзывы: