6
1.
While another person lifts the Base (1), attach the
Front Stabilizer (6) to the Base with two M10 x
82mm Patch Screws (82).
2. Remove the indicated screw and the shipping
bracket from the Base (1). Discard the screw and
the shipping bracket.
Next, tighten the Base Foot (26) into the Base (1)
as far as possible.
3. Attach the Rear Stabilizer (7) to the Frame (2) with
two M10 x 128mm Patch Screws (83).
Next, hold the handle on the Frame (2) and press
the Latch Button (68). Then, lower the Frame until
the Rear Stabilizer (7) rests on the floor.
6
82
1
1
Shipping
Bracket
26
Screw
3
83
7
Handle
2
68
2
1
To make assembly easier, read the information
on page 5 before you begin assembling the
elliptical exerciser.