10
9. Have a second person hold the Right Handrail
(105) near the Right Upright (79).
Insert the Upright Wire (86) into the bottom of
the Right Handrail (105) and out of the hole in
the top of the Right Handrail.
Attach the Right Handrail (105) to the Right
Upright (79) with three 5/16" Star Washers (9)
and three 5/16" x 3/4" Bolts (4).
Start the Bolts
but do not tighten them yet. Be careful not to
pinch the Upright Wire (86).
86
79
4
Hole
4
105
9
9
10. Have a second person hold the console assem-
bly near the Right Upright (79). Connect the
Upright Wire (86) to the console wire.
See the
inset drawing. The connectors should slide
together easily and snap into place.
If they do
not, turn one connector and try again.
IF THE
CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN YOU TURN ON THE POWER.
Then, remove the wire tie from the Upright Wire.
Insert the connectors and the excess wire into
the Right Handrail (105).
Set the console assembly on the Right Handrail
(105) and the Left Handrail (not shown).
Be
careful not to pinch the wires.
79
Console
Assembly
10
86
Console
Wire
Console
Wire
Wire Tie
86
105
