Pro-Form 530 ZLT PETL59814.0 Скачать руководство пользователя страница 15

15

HOW TO PLUG IN THE POWER CORD

This product must be earthed.

 If it should malfunc-

tion or break down, earthing provides a path of least 

resistance for electric current to reduce the risk of 

electric shock. This product’s power cord has an 

equipment-earthing conductor and an earthing plug. 

IMPORTANT: If the power cord is damaged, it must 

be replaced with a manufacturer-recommended 

power cord.

Follow the steps below to plug in the power cord.

1.   Plug the indicated end of the power cord into the 

socket on the treadmill.

2.   Plug the power cord into an appropriate outlet that 

is properly installed and earthed in accordance with 

all local codes and ordinances.

     DANGER:

 

Improper connection of 

the equipment-earthing conductor can result 

in an increased risk of electric shock. Check 

with a qualified electrician or serviceman if 

you are in doubt as to whether the product 

is properly earthed. Do not modify the plug 

provided with the product—if it will not fit 

the outlet, have a proper outlet installed by a 

qualified electrician.

HOW TO USE THE TREADMILL

IT

FR/SP

UK

GR

RU

HU

Socket on Treadmill

IT

FR/SP

UK

GR

RU

HU

UK

GR

FR/SP

IT

AUS

AUS

Outlet

UK

Australia

Outlet

Power Cord

Содержание 530 ZLT PETL59814.0

































Отзывы: