Pro-Form 420 Ce Elliptical Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 28

Pro-Form 420 Ce Elliptical Скачать руководство пользователя страница 12

12

12

14.

Make sure that all parts of the elliptical are properly tightened.

Note: Extra parts may be included. To

protect the floor or carpet from damage, place a mat under the elliptical.

12. Identify the Right Rear and Front Leg Covers

(29, 30).

Attach the Right Rear Leg Cover (29) to the
Right Upper Body Leg (6) with three M4 x 16mm
Screws (93).

Attach the Right Front Leg Cover (30) around
the Right Upper Body Leg (6) by pressing the
tabs on the Right Front Leg Cover into the Right
Rear Leg Cover (29).

Attach the Left Rear and Front Leg Covers
(31, 32) in the same way.

See step 3.

Tighten the four M8 x 16mm

Screws (102).

Then, slide the Top Cover (23) downward and
press it over the Frame (1).

30

29

31

32

6

93

23

1

13. Plug the Power Adapter (79) into the receptacle

at the back of the elliptical.

Note: To plug the Power Adapter (79) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 13.

13

79

«
...
10
11
12
13
14
...
»

Содержание 420 Ce Elliptical





























Отзывы:

Нет отзывов