Pro-Form 380 Razor PFEVEL74008.0, Руководство пользователя

Страница: 9 / 28

9
9
8
8. Identify the Left and Right Pulse Bars (5, 16),
which are marked with “Left” and “Right” stickers.
Have another person hold the Right Pulse Bar
(16) near the Upright (2).
Connect the console pulse wire in the Upright
(2) to the Pulse Wire (37) in the Right Pulse Bar
(16).
Tip: Avoid pinching the wires. Attach the
Right Pulse Bar (16) to the Upright (2) with an
M10 x 20mm Patch Screw (79) and an M10
Split Washer (78).
Repeat this step for the Left Pulse Bar (5).
16
14
13
15
Bumper
Hole
82
79
78
5
2
37
Avoid
pinching
the wires
Pulse Wire
9. Identify the Right Pedal (13), which is marked
with a “Right” sticker, and orient it as shown.
Locate the bumper on the underside of the right
Pedal Arm (14). Then, position the hole in a
Pedal Bracket (15) over the bumper.
Attach the Right Pedal (13) and the Pedal
Bracket (15) to the right Pedal Arm (14) with
four M8 Locknuts (82).
Repeat this step for the Left Pedal (not
shown).
7
7. Slide the Console Cover (96) upward to the
Console (4). Insert the console pulse wires
downward through the Console Cover.
Tip: Avoid pinching the wires. Attach the
Console Cover (96) with four M4 x 16mm
Round Head Screws (84).
96
Pulse Wires
84
4
Avoid pinching
the wires