background image

22

HOW TO CHANGE CONSOLE SETTINGS

1.   Select the settings mode.

   To select the settings mode, press the Settings 

button. The first settings screen will appear in the 

display. 

2.   Navigate the settings mode.

   While the settings mode is selected, you can 

navigate through several settings screens. Press 

the Display button repeatedly to select the desired 

settings screen.

3.   Change settings as desired.

  

Software Version Number—The software version 

number will appear in the display.

  

Unit of Measurement—The currently selected 

unit of measurement will appear in the display. The 

console can show speed and distance in standard 

or metric units of measurement. To change the unit 

of measurement, press the St/M button repeatedly. 

To view workout information in standard units, 

select STD. To view workout information in metric 

units, select MET.

  

Display Test—This screen is intended to be used 

by service technicians to identify whether the 

display is working correctly.

  

Button Test—This screen is intended to be used 

by service technicians to identify whether a certain 

button is working correctly.

  

Total Time—The word TIME will appear in the 

display. The display will show the total number of 

hours that the elliptical has been used.

   Total  Distance—The letters MI or KM will appear 

in the display. The display will show the total 

distance (in miles or kilometers) that the elliptical 

has been pedaled.

  

Contrast Level—The currently selected contrast 

level will appear in the display. Press the Quick 

Resistance increase and decrease buttons to 

adjust the contrast level. 

  

Demo Mode—The currently selected demo mode 

option will appear in the display. The console 

features a demo mode, designed to be used if the 

elliptical is displayed in a store. If the demo mode 

is turned on, the console will not turn off and the 

display will not be reset when you finish exercis-

ing. Press the Quick Resistance increase button 

repeatedly to select a demo mode option. To turn 

on the demo mode, select DON. To turn off the 

demo mode, select DOFF.

4.   Exit the settings mode.

   Press the Settings button to exit the settings mode.

Содержание 23937.0

































Отзывы: