17
Inspect and tighten all parts of the exercise bike regu-
larly. Replace any worn parts immediately.
To clean the exercise bike, use a damp cloth and a
small amount of mild detergent.
IMPORTANT: To
avoid damage to the console, keep liquids away
from the console and keep the console out of
direct sunlight.
CONSOLE TROUBLESHOOTING
If the console display becomes dim, replace all the
batteries at the same time; most console problems are
the result of low batteries. To replace the batteries,
see assembly step 5 on page 8.
If the handgrip pulse sensor does not function prop-
erly, see step 5 on page 15.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, the left pedal and the left shield must be
removed.
Using an adjustable wrench, turn the left pedal clock-
wise and remove it. Next, remove all of the screws
from both shields;
there are two sizes of screws in
the shields—note which size of screw you remove
from each hole.
Then, carefully remove the left
shield.
Locate the Reed Switch (39). Turn the Left Crank Arm
(66) until a Magnet (38) is aligned with the Reed
Switch. Loosen, but do not remove, the M5 x 15mm
Screw (47). Slide the Reed Switch slightly closer to or
away from the Magnet, and then retighten the Screw.
Turn the Left Crank Arm for a moment. Repeat until
the console displays correct feedback.
When the Reed Switch is correctly adjusted, reattach
the shields and the left pedal.
MAINTENANCE AND TROUBLESHOOTING
66
47
39
38
All manuals and user guides at all-guides.com
