Pro-face Xycom 3015, Руководство по оборудованию

Страница: 24 / 44

INSTALLING THE UNIT
After you have selected and prepared an appropriate location, hooked up the power
supply, and adjusted the display, you can install the unit.
Panel-Mounting
The system is generally placed in a NEMA 4/4X/12 enclosure to protect against contam-
inants such as dust, moisture, etc. Metal enclosures also help minimize the effects of
electromagnetic radiation that nearby equipment can generate.
Warning:
For class II hazardous locations the 3015 MUST be installed within a
dust-proof enclosure. Refer to Appendix B for information regarding hazardous
locations.
To Panel-Mount the Unit
Refer to the mounting specifications (page 7) for your unit to complete these steps.
1.
Cut an opening in the panel. Create a cutout in the panel to specifications. Make sure
the area around the cutout is free of metal burrs.
2.
Drill the mounting holes to specifications.
3.
Secure the unit in place.
4.
Tighten the mounting nuts to specifications.
Rack-Mounting
You can position and secure the unit in a 19” universal spacing rack. Refer to the
mounting specifications (page 7) for your unit to complete these steps.
Warning:
Install the unit in a manner that does not create an unsafe load condition
when mounted in the rack. You may need to reconfigure other equipment in the rack.
Warning:
For class II hazardous locations the 3015 MUST be installed within a
dust-proof enclosure. Refer to Appendix B for information regarding hazardous
locations.
To Rack-Mount the Unit
1.
Attach the unit securely in the rack, using the proper mounting hardware for your
rack.
2.
Install the unit in the rack, using standard rack-mounting hardware.
3.
To remove the unit from the rack, reverse the procedure.
20 Installation