Pro-face PL-7900 Series, Руководство пользователя

Страница: 62 / 104

System Setup
5 - 1
PL-7900 Series User Manual
1) Connect a keyboard to the PL.
2) Turn the PL's power ON.
3) After the message "Press <DEL> to Enter SETUP" appears, press the [DEL]
key until the following screen appears.
The following settings are those pre-set at the factory.
Normally, use only the factory (default) settings.
Chapter
5
5-1 Setup Procedures
5-2 System Parameters
This chapter explains how to enter a PL-6900 Series unit's system settings, as well as the
cautions required both before and during set up.
System Setup
5-1 Setup Procedures
KEYBOARD ACTION KEYS
Provides a summary of the keyboard keys used to carry out the set up.
SYSTEM SETTING SELECTION AREA
Each of the titles (areas) listed here contains system setting items.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
SYSTEM MONITOR UTILITY
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
ROM PCI/ISA BIOS (2A5LEU1C)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
ESC : Quit
! " # $
: Select Item
F10 : Save & Exit Setup (Shift)F2 : Change Color
Time,Date,Hard Disk Type •••
4) Use the arrow keys to move the cursor to the desired selection.
!!!!!
Important
Note: