Pro-face GP2500-TC41-24V, Руководство по установке

Страница: 3 / 12

The GP2500-TC41-24V and the GP2600-TC41-24V are UL/c-UL(CSA) listed
products. (UL file No. E182139)
This Unit conforms as a component to the following standards:
„ „
„ „
„
UL508
Industrial Control Equipment
„ „
„ „ „
UL1604
Electrical Equipment for Use in Class I and II Division 2 and Class III Hazard-
ous (Classified) Locations
„ „ „ „ „
CAN/CSA-C22.2, No.1010-1
Safety Requirements for Electrical Equipment for Measurement, Control and
Laboratory use
GP2500-TC41-24V (UL Registration Model : 2880045-01)
GP2600-TC41-24V (UL Registration Model : 2880045-02)
<Cautions>
• The GP must be used as a built-in component of an end-use product.
• The GP should be installed in the front face of a metal panel.
• If the GP is installed so as to cool itself naturally, be sure to install it in a verti-
cal panel. Also, be sure that the GP is mounted at least 100mm away from
adjacent structures and other equipment, otherwise, the heat generated by the
GP's internal components may become higher than that allowed by UL stan-
dard requirements.
UL1604 Conditions of Acceptability and Handling Cautions:
1. Power, input and output (I/O) wiring must all be in accordance with Class I,
Division 2 wiring methods, Article 501-4 (b) of the National Electrical Code,
NFPA 70, or as specified in Section 18-152 of the Canadian Electrical Code
for units installed within Canada, and in accordance with that location's au-
thority.
2. Suitable for use in Class I, Division2, GroupsA, B, C and D hazardous loca-
tion, or nonhazardous locations only.
3. WARNING: Explosion hazard - substitution of components may impair suit-
ability for Class I, Division2.
4. WARNING: Explosion hazard - do not disconnect equipment unless power
has been switched off or the area is known to be nonhazardous.
5. WARNING: Explosion hazard - when in hazardous locations, turn off power
before replacing or wiring modules.
GP2500-TC41-24V and GP2600-TC41-24Vare CE marked , EMC compliant
products.These units also conform to EN55011 ClassA , EN61000-6-2 direc-
tives.
For detailed CE marking information, please contact your local distributor.
UL/c-UL(CSA) Approval
CE Marking