Pro-face GP-4501T, Руководство по замене

Страница: 53 / 55

53/55
Chapter 5 Appendix
5.1 Changing the setting of the external media to use
If a CF card is used for GP-PRO/PBIII, after GP-477RE is replaced with GP-4501T/TW
with the Project Converter of GP-Pro EX, “a CF card” is automatically replaced with “a
SD card” for the external media setting.
(1)
After conversion of the project file data, at GP-Pro EX Error Check, if the message,
“The project contains features that require a SD card. However, the selected
display does not support SD cards so these features will not run.” appears,
<Cause>
The model without a SD card slot has the setting that uses a SD card.
->
Solution 1
(2) To use a USB flash drive instead of a SD card -> Solution 1
(3) To check or change the SD card’s data output destination folder setting
->
Solution 2