Pro-face GP-4000M, Руководство по замене

Страница: 33 / 34

33/34
(1)-3: I/O settings are made.
GP-4201TM does not support I/O Connection. If I/O Settings are made, the Display Unit
cannot be changed.
Click [Project]->[System Settings]->[I/O Driver] and check the displayed I/O settings.
(1)-4: Unsupported variables are registered in Symbol Variable Setting.
GP-4201TM supports only the variables of [Word Address] or [Bit Address].
Click [Common Settings]->[Symbol Variable]. If variables except [Word Address] or
[Bit Address] are registered, the Display Unit cannot be changed. If a variable except
these 2 types is registered, change the type to [Word Address] or [Bit Address], or
replace it with another address.
(1)-5: In Logic Programs Setting, [Address Format] is selected.
GP-4201TM does not support Logic Function. When [Address Format] is selected for
[Register Variable] in the Logic Programs Setting, even if no logic setting is made, the
Display Unit cannot be changed.
Click [Project]->[System Settings]->[Logic Programs]. If [Address Format] is selected
for [Register Variable], change it to [Variable Format].
(2)-1: In Device/PLC Setting, multiple communication drivers are registered.
For GP-4201TM, only one communication driver can be set. (But,
if [Enable Ethernet
Multilink] is selected, and GP-4201TM is used as a slave, up to 2 can be set.) If the
Device/PLC setting exceeds the upper limit, the Display Unit cannot be changed.
Click [Project]->[System Settings]->[Device/PLC]. Check the displayed Device/PLC
setting.
(2)-2: A communication driver that is not supported is set.
If a communicaton driver that cannot be used for GP-4201TM is set, the Display Unit
cannot be chagned.
Click [Project]->[System Settings]->[Device/PLC] and check the displayed Device/PLC
setting and change the communication driver setting.
For the communication drivers that are supported by GP-4201TM, see [4.1 Driver List].