Pro-face GP-4000M, Руководство по замене

Страница: 14 / 34

14/34
Chapter 3 Replacement Procedure
3.1 Work Flow
Receive screen data from
ST3000 series *1
Change the received data
on GP-Pro EX.
Check and modify the data
on GP-Pro EX.
Transfer the screen data to
GP-4201TM.
Connect GP-4201TM and
the PLC with a cable.
Start connection and check
the communication.
Remove ST3000 series.
Connect the power cord.
Check the performance
and start operation.
Installation Screen Communication
Install GP-4201TM.
Check the compatibility of
hardware in Chapter 2.
Check the connection
between GP-4201TM and a
PLC in the GP-Pro EX
Device/PLC Connection
Manual.
Check the restrictions for
GP-4201TM with GP-Pro EX
Reference Manual.
*1: This step is required if screen data is saved only in the display unit, not in any other device.
Process the panel.