Pro-face GLC2500-TC41-24V, Руководство пользователя

Страница: 11 / 14

-25-
„ „ „ „ „
Ethernet Interface
This interface complies with the IEEE802.3 standard for Ethernet (10BASE-
T) connections. This interface uses an RJ-45 type modular jack (8 points).
„ „
„ „ „
CF Card Interface
This slot accepts a CF Card.
„ „ „ „ „
Expansion CF Card Interface
This interface is for connecting the Front Maintenance CF Card Unit.
„ „
„ „
„
Expansion Unit Interface 1
This interface is used to connect an expansion unit that can transmit data over
„ „
„ „ „
Expansion Unit Interface 2
Provides expanded features.
„ „
„ „ „
Tool Connector
Connects a Data Transfer Cable or bar code reader.
• Before installing the GLC into a cabinet or panel, check that
the installation gasket is securely attached to the unit.
• A gasket which has been used for a long period of time may
have scratches or dirt on it, and could have lost much of its
dust and drip resistance. Be sure to change the gasket peri-
odically (or when scratches or dirt become visible).
„ „ „ „ „
Confirm the Installation Gasket's Positioning
It is strongly recommended that you use the gasket. It absorbs vibration in
addition to repelling moisture.
Place the GLC on a level surface with the display panel facing downward.
Check that the GLC’s installation gasket is seated securely into the gasket’s
groove, which runs around the perimeter of the panel’s frame.
„ „ „ „ „
Screw Lock Terminal Block
This interface is used for external reset, Flex Network conections, or sound
output.
Pin Arrangement I/F Pin No. Signal Name Meaning
External Reset 1 AUXCOM External Reset Common
2 AUXRESET External Reset Input
Flex Network I/F 3 TR+ CH1 Comunication Data
4 TR- CH1 Comunication Data
5 SLD CH1 Cable, Sheild
6 TR+ CH2 Comunication Data
7 TR- CH2 Comunication Data
8 SLD CH2 Cable, Sheild
9 Reserved Reserved
Sound I/F 10 SP OUT Speaker Output Terminal
11 GND Ground
12 LINE OUT Line Out Output Terminal
1
12
5 Installation
Gasket
Rear face