7. Insert the new Backlight, and attach its connector.
8. As shown in the diagram, insert the GLC case's positioning tabs into
the alignment holes, close the covers, and fasten the two top-face
attachment screws.(G)
• When reconnecting the GLC's covers, be careful not to pinch
any of the backlight wiring between the covers.
6. Push the connector clip to the right and pull out the backlight. (F)
• Do not move the clip to the left when removing the back light,
since it may break off.
Power Cord
B
C
Connector
A
D
Internal Pad
G
F
Clip
Backlight
Connector
E
Positioning
Tabs
Center
Attachment Screws
Hole
