Pro-face FP-790T, Руководство пользователя

Страница: 19 / 57

FP-790T User Manual
Specifications
2-4
2-3-1 Analog RGB Interface (RGB IN)
2-3 Interface Specifications
Be sure to use Proface's optional cable. If any other cable is used, due to
possible noise interference, Proface cannot guarantee the FP will perform
as specified.
VESA Standard Horizontal Vertical Dot Clock Sync Logic
Display Mode Frequency Frequency Frequency V.H
31.469 kHz 59.992 Hz 25.175 MHz -,-
37.500 kHz 75.000 Hz 31.500 MHz -,-
37.879 kHz 60.317 Hz 40.000 MHz +,+
46.875 kHz 75.000 Hz 49.500 MHz +,+
48.363 kHz 60.004 Hz 65.000 MHz -,-
56.476 kHz 70.069 Hz 75.000 MHz +,+
60.023 kHz 75.029 Hz 78.750 MHz +,+
31.469 kHz 70.087 Hz 28.322 MHz +,-
37.927 kHz 85.039 Hz 35.500 MHz +,-
720×400
VGA
SVGA
XGA
US Text
Size
640×480
800×600
1024×768
Pin No. Signal Name Condition Pin Location
1 ANALOG R R Signal Input
2 ANALOG G G Signal Input
3 ANALOG B B Signal Input
4 NC No Connection
5 GND GND
6 RETURN R R Signal GND
7 RETURN G G Signal GND
8 RETURN B B Signal GND
9 NC No Connection
10 GND GND
11 NC No Connection
12 NC No Connection
Horizontal Synchronous
Signal Input
Vertical Synchronous
Signal Input
15 NC No Connection
H. SYNC 13
V. SYNC 14
The allowable frequency fluctuation range in both the horizontal and
vertical frequencies is +/- 1%. If fluctuations exceed these ranges,
the FP will enter power save mode and the display will go blank.
Recommended Connector: Mini Dsub 15 pin (JST Co.) KEY-15S-2A3F eqivalent
Connector set screw: Inch type (4-40UNC)
Cable: Digital Electronics Corporation RGB cable (FP-CV00,
FP-CV01)