4
MIXER GRINDER
KMG-32
Reverse the steps and sequence to install the mixing blades and the grinding unit again (See Fig. 1):
a) Insert Headstock (2) aligning hole and superior pin. Fix both parts with the Nut (3).
b) Insert Worm (4) and Blade (5)
– Blade´s sharp face must be forward.
c)
Place plate (6) centered against blade (5) assuring the notch matches the
Headstock’s inserted pin. Finally complete the
assembly with the ring (7).
d) To assemble the deflector (27), insert the superior hook at the external radius of ring (7) (doughnut-shape) then push it against
the ring until you hear
“click”.
IMPORTANT!:
Assembling the Grinding unit by separately extends the life and guarantee
the correct operation of the headstock and its components.
HOPPER GUARD
During the operation of the Mixer-grinder, the hopper guard (19) must be closed all the time to avoid personal injuries. Open the
hopper guard and lock it by pushing the lever against the bolt until
“clicks”. (See Fig 2) Introduce the meat or the product to mix or
grind, then push the lever in the opposite direction to unlock it. Close the hopper guard.
For safety, the Mixer-grinder has a magnetic interrupter that allows the operation while the hopper guard is closed. If the hopper
guard is opened during the equipment working, it will be turned off.
CASTER OR WHEELS
The mixer-grinder has four wheels (21) & (22), two of them has a lock system which helps during installation or operation. To
relocate the machine, unlock these wheels and then pull or push the mixer-grinder.
