Pro Charging Systems 1250OB Скачать руководство пользователя страница 7

 
LIGHT EMITTING DIODES (LED) FAULT CODE INDICATIONS  

 

The microprocessor is constantly monitoring the charger circuitry and will both detect and display blinking LED indications if a 
fault is detected.  The battery type LED will be 

OFF

 during a fault code condition.   

 
30% RED LED BLINKING ..................................................................NO BATTERY DETECTED  
This indication occurs whenever the charger circuitry cannot detect a battery.  The charger circuitry will not allow charge 
current to flow under this condition.  With the AC power supply cord unplugged, check the connection to the batteries for 
proper polarity (black wire to negative or -).  Also check for corrosion free secure connections to the battery.   
 
30 & 60% RED LEDS BLINKING ………………..…..…FORMING STAGE TIMEOUT SHUTDOWN  
This indication occurs if the battery voltage has not risen above 1.75 volts per cell within the first 3 hours of charging.  This 
indicates that a possible battery problem exists and that the charge cycle has been terminated at this point.   
 
30, 60 & 90% RED LEDS BLINKING............................................OVERALL TIMER SHUTDOWN  
This indication occurs if the charger has not completed the charge cycle within the allowable factory set time period.  This 
indicates that a possible battery problem exists and that the charge cycle has been terminated at this point. 
 
30 & 90% RED LEDS BLINKING …..…..............................INTERNAL OVERTEMP SHUTDOWN  
This indication occurs if the charger circuitry has detected operating temperatures inside the charger enclosure that are 
above factory specified levels.  This could indicate that a possible charger problem exists and that the charge cycle has been 
terminated.   
 
30% RED & 100% GREEN LEDS BLINKING …..….......................... BULK STAGE SHUTDOWN  
This indication occurs if the battery voltage does not rise properly during the Bulk Stage. This indicates that a possible battery 
problem exists and that the charge cycle has been terminated at this point.  Please call technical support for further 
assistance (800.742.2740). 
 
Note: Disconnecting and reconnecting the AC power supply cord will reset the charger. 

 

LIMITED WARRANTY 

 
Pro Charging Systems, LLC (PCS) makes this Limited Warranty only to the original retail purchaser.   
 
PCS warrants this battery charger for three years (unless the serial number ends with a suffix of RM or CR*) from the date of 
retail purchase against defective materials and/or workmanship.  *-RM suffix refers to “Restricted Markets”  such as Rental 
applications and Heavy Industrial applications, and designates the warranty period as 18 months from the date of retail 
purchase against defective materials and/or workmanship, and CR refers to “Certified Reconditioned” and designates a 1 
year warranty.    If such defects should occur, this unit will either be repaired or replaced at the discretion of the 
manufacturer.  It is the responsibility of the original purchaser to return the charger along with proof of purchase, 
transportation, and/or any mailing or handling charges prepaid to the manufacturer or its authorized representative. 
 
This limited warranty is void if the product is misused, improperly maintained, handled carelessly or incorrectly operated.  
Additionally, this warranty is void if the charger is disassembled, the charger’s charge cables are cut, the power cord is cut 
off, the charger is altered without authorization from PCS, the serial number is removed, or repair is attempted by anyone 
other than an authorized representative.   
 
PCS makes no other warranty other than this limited warranty and expressly excludes any implied warranty, including 
warranty for any incidental or consequential damages. 
 
This is the only expressed limited three year warranty authorized by PCS and does not authorize anyone to assume or make 
any other obligation towards the product other than this three year Limited Warranty.  Some states do not allow limitation of 
incidental or consequential damages. 
 
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 
 
Please call Pro Charging Systems, LLC for full warranty information and/or service please call (800.742.2740).   
 
Below are some of our other options in chargers and battery accessories.  Call our technical support group for more detailed 
information or visit our web site www.dualpro.com. 

 

Содержание 1250OB









Отзывы: