Pro Audio MPA204, Руководство пользователя

Страница: 18 / 28

MPA204
4
GB
©2007 Music & Lights s.r.l. - Italy - www.musiclightsitaly.com - FP- 05 /12/07 - Rev01
» AC MAINS CONNECTION - STARTUP
Connect to AC Mains.
Connect your amplifier to the AC mains power source
(power outlet) with the supplied AC power cordset. First,
connect the IEC end of the cordset to the IEC connector on
the amplifier; then, plug the other end of the cordset to
the AC mains.
WARNING
: The third prong of this connector(ground)
is an important safety feature. Do not attempt to disable
this ground connection by using an adapter or other
methods.
Amplifiers don t create energy. The AC mains voltage and
current must be sufficient to deliver the power you expect.
You must operate your amplifier from an AC mains power
source with not more than a 10% variation above or a 15%
variation below the amplifier s specified line voltage
and within the specfied frequency requirements (indicated
on the amplifier s back panel label). If you are unsure of
the output voltage of your AC mains, please consult your
electrician.
Startup Procedure.
Use the following procedure when first turning on your
amplifier:
1. Turn down the level of your audio source.
2. Turn down the level controls of the amplifier.
3. Turn on the Power switch. The Power indicator should glow.
4. Turn up the level of your audio source to an optimum level.
5. Turn up the Level controls on the amplifier until the
desired loudness or power level is achieved.
6. Turn down the level of your audio source to its normal
range.
If you ever need to make any wiring or installation changes,
do not forget to disconnect the power cord.