PRO AIR TPK 21 LT Скачать руководство пользователя страница 15

Страница: 15 / 128

7.3 Application of a pre-filter / water separator

7.4 Mounting examples

Depending on the state of the compressed-air system and distribution network, it is possible for

dirt, condensate or oil to leak out from the measuring point. In order to avoid damage to the

probe in such critical areas of application, a water separator with a fine filter can be connected

upstream of the device. The upstream components must not alter the moisture content of the air or

unduly impair the response. We can provide you with a list of suitable components upon request.

The device is suitable for a variety of applications. The flexible design of the measuring chamber

allows it to be easily adapted to the intended use:

Connection to a 7.27,2 mm NW quick coupler:

This connection can be quickly and easily performed

within minutes, without any complex installation.

An NW 7.2 plug-in nipple with a 3/8" thread is

connected to the underside of the device.

The device is connected directly to the coupling, and no

further mounting is required.

The choke is set to approximately 60 l/h (factory setting,

as delivered).

Permanent connection to a compressed air line:

This type of connection is ideal when there is only a short

distance to the main line because no purge air is consumed.

Underneath, a 3/8" double nipple is mounted and

connects to the pipe.

In the case of direct connection to a main line, the choke is

closed.

For greater connection distances or spur lines, the choke is

set to approximately 60 l/h.

Содержание TPK 21 LT

































































































































Результаты поиска

Содержание TPK 21 LT

Отзывы:

Бренды по названию

Популярные бренды

PRO AIR TPK 21 LT, Функциональное описание и инструкция по эксплуатации

Результаты поиска

Содержание TPK 21 LT

Отзывы:

Бренды по названию

Популярные бренды