Moog Components Group Single Port GBE Media Converter Manual August 12, 2009
Page 6 of 7
J6
:
8-pin RJ-45 connector/transformer for Ethernet
J7
: Reset chip at this location
JUMPER POSTS:
There are no jumper posts on this board.
1.3.2
Single Port Gigabit Ethernet Board Specifications:
Number of Ethernet links:
1 per board
Data rates supported:
Gigabit Ethernet only
1.3.3
Gigabit Ethernet board Dimensions:
Printed circuit board (PCB): 1.90 inches x 4.00 inches
(48.26mm x 101.6 mm)
1.3.4
Gigabit Ethernet board Power Requirements:
The Gigabit Ethernet board
utilizes approximately 2.5 Watts of power.
5.0VDC input, approximately 500mA
10.0VDC input, approximately 250mA
12.5VDC input, approximately 200mA
20.0VDC input, approximately 125mA
25.0VDC input, approximately 100mA
1.3.5
Power Section Testing
NOTE: The connectors and components on the bottom of the Gigabit Ethernet board
have pins that are connected to internal supply voltages and ground. If these pins are
inadvertently shorted together or to a common chassis ground, the board fuse (F1) will
trip/reset.
J6
Gigabit Ethernet
RJ-45 Connector
Left
o o o o o o o o Right
Pin # 8 7 6 5 4 3 2 1
Pin #
1000Mbps
1
A+
2
A-
3
B+
4
C+
5
C-
6
B-
7
D+
8
D-
