P R I V O R O . C O M
APPENDIX
FCC Compliance Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference
received, including interference that
may cause undesired operation.
Canadian Regulatory Statement
This device complies with Industry Canada’s licence-exempt
RSSs. Operation is subject to the following two conditions:
1) This device may not cause interference; and
2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
1) l’appareil ne doit pas produire de brouillage;
2) l’appareil doit accepter tout brouillage radioélec-
trique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Specific Absorption Rate (SAR)
Certification Information
This device is a radio transmitter and receiver.
It is designed and manufactured not to exceed
the exposure limits for Radio Frequency (RF)
energy set by the Federal Communications
Commission (FCC) of the U.S. Government.
These FCC RF exposure limits are derived
from the recommendations of two expert
organizations: the National Council on Radiation
Protection and Measurement (NCRP) and the
Institute of Electrical and Electronics Engineers
(IEEE). In both cases, the recommendations were
developed by scientific and engineering experts
drawn from industry, government, and academia
after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The RF exposure limit set by the FCC for wireless
mobile devices employs a unit of measurement
known as the Specific Absorption Rate (SAR).
The SAR is a measure of the rate of absorption
of RF energy by the human body expressed in
units of watts per kilogram (W/kg). The FCC SAR
limit incorporates a substantial margin of safety
to give additional protection to the public and
to account for any variations in measurements.
For more information about SAR, visit:
•
fcc.gov./general/radio-frequency-safety-0
•
fcc.gov/encyclopedia/specific-absorp-
tion-rate-sar-cellular-telephones
EU Compliance Statement
Privoro hereby declares that this wireless device
is in compliance with the essential requirements
and other relevant provisions of the Radio
Equipment Directive 2014/53/EU, as applicable.
A copy of the EU Declaration of Conformity is
available at
privoro.com/legal
. Legal, regulatory
and compliance documentation is also available
review at the same link.
European Union—Disposal Information
The Wheeled Bin symbol means that according
to local laws and regulations your product and/
or its battery shall be disposed of separately
from household waste. When this product
reaches its end of life, take it to a collection
point designated by local authorities. The
separate collection and recycling of your
product and/or its battery at the time of
disposal will help conserve natural resources
and ensure that it is recycled in a manner that
protects human health and the environment.
Appendix E: Regulatory information
Appendix D: Recycling
Privoro has partnered with Call2Recycle for your device and battery recycling needs (within the United States
and Canada). To find a recycling location near you, go to
call2recycle.org/locator
and enter your zip code.
©
2
0
2
2 P
ri
vo
ro L
LC o
r i
ts a
ffi
lia
te
s. A
ll r
ig
h
ts r
es
e
rv
e
d
. i
P
h
o
n
e i
s a r
e
g
is
te
re
d t
ra
d
e
m
ar
k o
f A
p
p
le I
n
c. T
h
e P
ri
vo
ro S
af
e
C
as
e
d
ev
ic
e i
s n
o
t a
ffi
lia
te
d
, a
ss
o
ci
at
e
d
, s
p
o
n
so
re
d
, e
n
d
o
rs
e
d b
y, o
r i
n a
ny w
ay o
ffi
ci
al
ly c
o
n
n
e
ct
e
d w
it
h A
p
p
le
. P
V
O
S
U
P
0
2
2
9
V
0
1
