Privacy Electronics DS-DVR04 Series Скачать руководство пользователя страница 118

Страница: 118 / 161

User Manual of DS-DVR04, DS-DVR08, DS-
DVR16 Series DVR

8.5 Handling Exceptions

Purpose:

Exception settings refer to the handling method of various exceptions, e.g.,

•

HDD Full:

The HDD is full.

•

HDD Error:

Writing HDD error, unformatted HDD, etc.

•

Network Disconnected:

Disconnected network cable.

•

IP Conflicted:

Duplicated IP address.

•

Illegal Login:

Incorrect user ID or password.

•

Input / Output Video Standard Mismatch:

I/O video standards do not match.

•

Record Exception:

No space for saving recorded file.

Steps:

Enter

Exceptions

interface of System Configuration and handle various exceptions.

Menu> Configuration> Exceptions

Please refer to

Chapter 8.5

for detailed alarm response actions.

Figure 8.16 Exceptions Setup Interface

113

Содержание DS-DVR04 Series


































































































































































Результаты поиска

Содержание DS-DVR04 Series

Отзывы:

Privacy Electronics DS-DVR04 Series, Руководство пользователя, Страница: 118 / 161

Результаты поиска

Содержание DS-DVR04 Series

Отзывы: