Prismafood C/0, Инструкция по установке, эксплуатации и обслуживанию, Страница: 15 / 29

14
SETTING PARAMETERS
TEMP KEY (2)
When pressed, the parameter to be set starts to flash in the order:
- UPPER TEMPERATURE
- LOWER TEMPERATURE
- BELT SPEED
Upon the third press, the setting is exited and the parameters set are confirmed. Alternatively, it is
possible to exit and confirm without passing all the parameters by pressing the ENTER key or instead to
wait a few seconds.
The settings are therefore always saved automatically.
MENU KEY (3)
Pressing results in access to the menu with the list of items:
- PROGRAMS
- SCHEDULER
- DATE/TIME
- BELT DIRECTION
- LANGUAGE
- MAINTENANCE MENU
- EXIT
Navigation takes place through the arrows (KEYS 4 and 5); to access the corresponding item press the
ENTER key; to exit the menu go to the exit item and press ENTER.
ENTER KEY (4)
If pressed in the main screen it has the function of starting or stopping the belt.
If within the parameters configuration or the menu, the parameter is saved.
LEFT ARROW KEY (5)
Navigation to the left by scrolling through the programs in the row of the main screen, starting with START
button. If within the parameter configuration it decreases the value or selects the previous item.
RIGHT ARROW KEY (6)
Navigation to the right by scrolling through the programs in the row of the main screen, starting with START
button. If within the parameter configuration it increases the value or selects the next item.
ON/OFF KEY (7)
It turns on the pcb or the door in standby when on.
PROGRAM SELECTION ON THE MAIN SCREEN
On the main screen the programs are visible as follows:
The empty box indicates that the
program in use is the manual
one. The program in use is 3. Instead, when selecting the
program using the navigation
arrows (4 and 5), the box
becomes full.
After 5 seconds, the program is
automatically activated.
It can also be saved by pressing
ENTER.
Note on the navigation keys: when pressed on the main screen, the first press fills the box of the program
in use, the second press moves the box to be able to select another program.