Prismafood 310 NEW, Инструкция по эксплуатации

Страница: 9 / 33

CHAPTER 2
INSTALLATION
2.1 INSTRUCTIONS FOR THE USER
The environmental conditions in which the machine must be installed must follow these characteristics:
- be dry
- water and heat sources at safe distance
- adequate ventilation and lighting (corresponding to hygiene and security rules following the existing laws).
The surface must be horizontal, for normal ventilation of the machine no objects should obstruct.
IMPORTANT
The electric net must be provided with an auto-matic differential switch and this has to be
suitable to the machine and have a distance between the contacts of at least 3 mm. It is
particularly important to have a good ground system.
Verify that the electrical set-up corresponds with the numbers of the technical characteristics (1.3) and
on the small plate at the back of the machine.
2.2 INSTALLATION METHODS
The machine is supplied in a closed package.
After taking out the two covers, the higher slide and the machine proceed as follows:
- Position the machine in the corresponding location.
- Remove protection, avoid contact with utensils that can damage the surfaces.
NOTE
All the material belonging to the packaging, must be disposed in conformity of the law.
2.3 ELECTRICAL CONNECTION
The connection of the machine to the electrical network is made through a cable provided with a plug.
2.4 POSITIONING OF THE MACHINE
The plug must be accessible, does not have to require any kind of movement.
The cable from the machine to the wall plug must not be pulled tightly, also do not rest the machine on the
cable.