280490 FGSH-450
- Owner’s Manual
Rev: 03/25/13
Page: 12
Operation:
Leg Spreading:
The legs of FGSH-450 lift are mechanically adjustable for opening, and closing base width. The Shift-
er Handle is used to open legs of the base for stability when lifting a patient.
The legs can be opened to enable access around arm chairs or wheel chairs.
1. Grasp the shifter handle in one hand and place the opposite hand on the push handle of the mast
for balance as shown in Figure 17.
2. Push the shifter handle to your RIGHT to release the lock pin from its mounting hole as shown in
Figure 18.
3. Turn the handle CLOCKWISE until you are able to secure the lock pin into the opposite mounting
hole to fully open the legs of the base as shown in Figure 19.
NOTE:
The lock pin MUST be inserted into its mounting hole in the socket assembly to lock
the legs in the full open position. The shifter handle will be in vertical position; parallel
with the mast assembly as shown in Figure 20.
Caution: Visually inspect the floor lift before using for any unusual wear and tear.
Should anything look unusual then contact your local representative prior to use.
Failure to comply with this caution could result in serious injury to the operator,
the individual being lifted and/or damage to the lift.
Figure 19
Figure 18
Figure 17
