Prism Medical UK Easy Fit, Руководство пользователя

Страница: 9 / 20

9
Assembly continued ......
5 . Depress the Ratchet Button to release the Lever,
then push the Lever up until it meets the Magnet
Symbol . Note: Pushing down on the top part of
the Support Post may help to release the Lever
6 . Push the top part of the Support Post upwards
until the Top Plate compresses against the ceiling .
Push until you hear two clicks on the ratchet
7 . Open the Post Level (opposite the Safety Lock)
and check that the bubble is within the central
circle by adjusting the position of the Support Post
8 . Pull the lever down until it flat to the support
leg and clicks into place
9 . Check to ensure that the blue marker on
Pressure Gauge (located at the top of the Support
Post) is comfortably into the green ‘safe’ zone
on both sides . If it is not, it will be necessary to
release the Lever again and apply more than two
clicks before closing it .
10 . Push the Safety Lock back into place until it
clicks and rotate the post to ensure that the lever
is facing 90 degrees to the position of the second
post .