© Prior Scientific Instruments Ltd., UK
Version 2.2 November 2015
Page 4
IMPORTANT SAFETY INFORMATION
SECTION 1
Always observe the following safety precautions
This symbol, used on the pump and in this manual, means: Caution, refer
to accompanying documents
Use only as specified by these operating instructions or the intrinsic
protection provided by the unit may be impaired.
Before using the stage system, please follow and adhere to all warnings,
safety and operating instructions located on the product and in this User
Manual.
DO NOT
expose the product to water or moisture while energised.
DO NOT
expose the product to extreme hot or cold temperatures.
DANGER – Never alter the AC cord or plug. The power cord set must be an
appropriately rated and approved cord set in accordance in the regulations of the
country it is used in. If the supplied plug adapter is not the correct fitting for your
geographic area or if you are unsure about the relevant regulations, please
contact your supplier for advice
Only use the supplied AC/DC adapter with this product.
Never substitute another adapter
.
Should the adapter be in any way faulty or damaged
contact your supplier
.
DO NOT
expose the product to open flames.
DO NOT
allow objects to fall on or liquids to spill on the product.
Make sure the electrical cord is located so that it will not be subject to damage.
Make sure the system in installed so that the front panel power switch is easily accessible.
Do not position equipment so that it is difficult to disconnect from power supply.
