Prio Expert MO Series Скачать руководство пользователя страница 6

6

Performance:

Performance of the appliance such as filtered water delivery rate, rejection rate, etc. is highly 
dependent on local conditions (inlet water pressure, temperature, TDS and degree of contam-
ination, tank air pressure, etc.) and R.O. system use pattern. Actual performance may vary.

Filtered water production rating: 75 gpd (270 lpd) maximum

Filtered water delivery rate (from the tank), typical: 0.27–0.74 gpm (1–2.8 l/min)

membrane rejection rate

1

, typical:  90%

Recovery rate (system efficiency

2

), typical:  15%

Drain water flow restrictor: 300 cc (ml/min) nominal, up to 360 cc in working mode.

Tank Storage Capacity (Total Volume): up to 2.5G (4.0G)

3

Tank full refill time

4

, typical: 70-120 min

Weight and Size:

R.O. filtration unit:
Size (WDH), body only, excluding protrusions: 13.46 x 3.35 x 14.80” (342 x 85 x 376 mm)
Weight, without water and tubing: 8.8 lbs (4.0 kg)
Storage tank:

Tank model No.

X842G

X852G

Storage Capacity (Total Volume)

up to 2.0G (3.2G)

up to 2.5G (4.0G)

Size (WxDxH), body only, 
excluding protrusions

9.8 x 9.8 x 13.6” 
(250 x 250 x 347 mm)

10.55 x 10.55 x 14.90” 
(268 x 268 x 378 mm)

Weight, without water and tubing

4.7 lbs (2.1 kg)

6.0 lbs (2.7 kg)

Warranty:

1 year worldwide limited warranty (+ local regulations if applicable) 

Package Contents:
(1)  The  R.O.  filtration  unit  with  installed  fil-

ters (K871, K870, K866, K875 for mO510; 
K871, K870, K866, K880 for mO520, 
mO530)

(1)  Storage  tank  (X842G  model  for  MO510, 

MO520; X852G model for MO530)

(1) Universal worldwide adapter ball valve 

(G1/2” - G3/8” - UNEF 9/16”-24 - JG 1/4”)

(1) Teflon tape roll

(1) Faucet
(1) Drain saddle 
(1) Wrench
(1) ¼” tank valve
(26 ft / 8 m) Water tubing ¼” 
(1) ¼” x ¼” union check valve
(2) ¼” x ¼” x ¼” union tee fitting
User’s guide

1

  For all dissolved solids combined as measured by TDS or conductivity meter.

2

  Efficiency rating means the percentage of the influent water to the system that is available to the user as 

reverse osmosis treated water under operating conditions that approximate typical daily usage.

3

  Depending on current SKU scope of supply.

Depending on supply water pressure.

Содержание Expert MO Series

















Отзывы: