Printronix

P9212, Руководство по установке

Страница: 90 / 206

Configuring the Printer 3–48
PRÉCAUTIONS
Lorsque la fonction PMD est désactivée, le déplacement du papier n’est
plus contrôlé. L’imprimante ne signale plus les bourrages papier et
continue l’impression, ce qui risque de l’endommager.
Slew Relative
The Slew Relative feature determines the number of lines slewed when an
EVFU Slew Relative command is received.
For further information, refer to the EVFU information in the Programmer’s
Reference Manual.
NOTE: The Slew Relative feature is available only when the P-Series XQ
Printer Protocol has been selected.
Set Platen @ BOF
This feature is used to open the platen when the paper moves past the bottom
of the form. This is useful for thick forms with perforations which may jam
or inadvertently force open the platen.
•
Enable. Opens the platen.
•
Disable. The platen remains closed.
Print Width
The Print Width feature controls the maximum physical width of the print
line; the printer will not print beyond this point.
•
13.2 inches
•
8 inches
For example, when using paper which is 8 1/2 inches wide, selecting an
8-inch print width prevents printing beyond the right margin and damaging
the hammer tips and platen.