Printronix

P9212, Руководство по установке

Страница: 78 / 206

Configuring the Printer 3–36
Paper Advance SW (Switch)
The Paper Advance SW parameter controls the action of the Form Feed (FF)
key on the printer’s control panel when the printer is off-line.
•
Print + Pap Adv: If there is no data in the printer’s internal input buffer
and you press the FF key, the paper immediately advances to
top-of-form. If there is unprinted data in the buffer when you press the
FF key, the printer first prints the data and then advances the paper only
to the next print line. In this case, if you press the FF key again, the paper
will then advance to top-of-form.
•
Move Paper Only: When you press the FF key, the paper immediately
advances to top-of-form; any unprinted data in the printer’s internal input
buffer is left undisturbed.
NOTE: When the printer is on-line, the Paper Advance SW parameter has
no effect.
If the printer is on-line, and there is no data in the printer’s internal
input buffer, pressing the FF key causes the paper to advance to
top-of-form.
If the printer is on-line, and there is unprinted data in the buffer,
pressing the FF key has no effect.
Power On State
The Power On State parameter determines the operating state when the
printer is powered on.
•
On-Line: When the printer is turned on, it will go into the on-line state
and will be ready to receive and print data.
•
Off-Line: When the printer is turned on, it will go into the off-line state.
You can configure the printer via the control panel or do other
mechanical operations, such as loading paper, installing ribbon, etc.